1. LON-CAPA Logo
  2. Help
  3. Log In
 

C-Fern Logo  C-Fern
C O N T E N T S
C-Fern Home
Web Manual
  Introduction
  C-Fern Nutrient Medium
  Culture Conditions
  Gametophyte Culture
  Gametophyte Observations
  Sporophyte Culture
  Spore Mutagenesis
  Bibliography

Other Resources

  Light Stand
  Growth Pod
  DNA Extraction
  C-Fern T-shirt
  Who's Who
  Selection and mutants
  Media formulation error
  Image gallery
Web Journal
Educational Resources
  National Science Standards
  Gametophyte development
  Student research questions
  Research in the classroom
  Research with C-Fern
  Brief description of C-Fern
  C-Fern manipulation
  Root tropism?
Frequently Asked Questions
Workshop and Exhibit Schedule
 Educational Materials
  Investigations
  Mutant & wild type spores
  Manual & Culture Instructions
  Supplies - Domes, media
Have questions?
Contact the C-Fern Project
cfern@utk.edu
 Supported, in part, by the National Science Foundation - Division of Undergraduate Education
Development of C-Fern is supported
by the National Science Foundation (NSF-DUE)
Copyright © 1997-2000
Thomas R. Warne and
Leslie G. Hickok.
All rights reserved.
 C-Fern Web Manual - Basic C-Fern Nutrient Medium

 

Prepared and Powdered C-Fern Basic Nutrient Medium is available from Carolina Biological Supply Company.

Prepared C-Fern Medium is melted in a hot water bath and poured into Petri dishes.The 160 ml bottle is identical to the size in the C-Fern kits and will pour 10 of the 60 x 15 mm dishes. The 400 ml bottle will pour 25 of the 60 x 15mm dishes.
#15-6780 160 ml
#15-6781 400 ml

 

Each packet of Powdered C-Fern Medium contains the nutrients to prepare 1 liter of medium. Adjust the pH, add 10 grams of Bacto AgarŪ, autoclave, and pour into Petri dishes.

#15-6782 1-liter packet powdered medium or 10 1-liter packets

Return to Table of Contents

Preparation of Agar-Solidified Basic C-Fern Nutrient Medium From Stock Solutions

 

Materials for Preparation of Stock Solutions:

  • Macro-, micronutrient and Fe salts (Refer to Table 1 for listing)
  • Distilled or deionized water
  • 1 l volumetric flask(s)
  • Microbalance
  • Magnetic stir plate and stir bars
  • For Fe stock solution: hot plate, 2 l erlenmeyer flasks, watch glass
  • Storage bottle(s)

(Refer to Table 1 below) All components of basic C-Fern nutrient medium should be prepared using high quality distilled and/or deionized water. Prepare macronutrient and micronutrient stock solutions separately by dissolving all listed quantities of components , individually, in sequence, into about 800 ml distilled water; bring to a 1 l final volume. Both macronutrient and micronutrient stock solutions can be autoclaved. Autoclaved stock solutions will keep for over 6 months and should be stored in glass at 4 C. Prepare Chelated Fe-EDTA stock solution by dissolving each component separately into c. 450 ml water. On a hot plate, heat EDTA solution to boiling, add hot EDTA solution TO the FeSO4 solution. Boil combined solutions for 1 hour, cool completely, then bring to 1 liter volume. Store Chelated Fe-EDTA solution in glass at 4 C.

Materials for Preparation of Final Medium:

  • Macro-, micronutrient and Fe stock solutions
  • Volumetric glassware: 100 ml graduated cylinder, 10 ml pipet, 1 l volumetric flask
  • Distilled or deionized water
  • 2l erlenmeyer flask (per 1 l media)
  • Agar P7-79-6200, P7-79-6201 -- BactoAgar
  • For pH adjustment: pH meter, magnetic stir plate, magnetic stir bar, 0.1 N NaOH solution
  • Foil (to cover flask during autoclaving)
  • Autoclave
  • Sterile Petri dishes, 60x15 mm P7-74-1346.

(Refer to Table 1 below) To prepare Basic C-Fern nutrient medium, add appropriate volume of each stock solution TO about 800 ml distilled water in a volumetric flask and bring to a 1 l final volume. For agar-solidified medium, transfer nutrient solution to 2 l Erlenmeyer flask, add 10 g (1% w/v) agar (BactoAgar, Difco Laboratories). NOTE: Some plant tissue culture grade agars and agar substitutes can result in inhibited or abnormal growth of gametophytes or sporophytes and should therefore be avoided. Adjust nutrient medium to pH 6.0 using 0.1 M NaOH. Autoclave nutrient medium at 120 C / 20 psi for 15 minutes. Dispense medium to Petri dishes. Dishes should be about ¾ full -- about 15 ml in a 60x15 mm dish and 40 ml in 100 mm dish. This ensures an adequate nutrient and water supply through to the young sporophyte stage. One liter of nutrient medium should pour about 55 60x15 mm dishes and 20 100 mm dishes. Allow dishes to cool completely undisturbed. Condensation on Petri dish lids is minimized if dishes are poured and cooled in stacks.

Table 1. Composition of Basic C-Fern Medium Stock Solution
and Final Medium Nutrient   

Nutrient Components
Stock Solution(g/L)
Final Medium (ml Stock/L) Final Medium Composition (mg/L)
1 -- 10 X MACRONUTRIENTS 100  
NH4NO3 1.25   125
KH2PO4 5.00   500
MgSO4 X 7H2 1.20   120
CaCl2 X 2H2 0.26   26
       
2 -- 200 X MICRONUTRIENTS 5  
MnSO4 X H20 0.0500   0.25
CuSO4 X 5H20 0.0740   0.37
ZnSO4 X 7H20 0.1040   0.52
H3BO3 0.3720   1.86
(NH4)6Mo7O24 X 4 H20 0.0074   0.037
       
3 -- 100 X CHELATED IRON SOLUTION 10  
FeSO4 X 7H20 2.78   27.8
Disodium EDTA X 2H20 3.37   37.3

This formulation is based on a media described in Klekowski 1969 (Botanical Journal of the Linnean Society 62: 361-377). Higher concentrations of macronutrients in the stock solution are unstable and may form precipitates as will most combinations of macronutrient, micronutrient and chelated iron stock solutions.